Castable resin for jewelry, castable resin for use with MonoLCD/DLP type 3D printers. With the miniaturization of pixels in LCD printers, it is now possible to print on the same level as professional machines. So we decided to develop a resin that we can be satisfied with. It features modeling resin-like molding power, a clean molding surface, and good castability. ※Due to shipping costs, we can accommodate up to three bottles, but please consult us for purchases of four or more※ ※For system reasons, the price shown includes tax but does not include tax. 17,000 yen (without tax)※ Please contact us for details.

For Sonic 4K / Sonic Mini 4K What is a diffuser? LCD printer with RGB and monochrome LCDs. This is the most common type of LED that uses square and hexagonal optical lenses called ParaLED and MatrixLED. This part improves the unevenness of the UV light unit's light brightness. It makes pixel marks and layer bumps less noticeable, and the whole image looks more beautiful and shiny. All parts are made in Japan, so you can use it with confidence. It is installed on top of the LED unit as shown in the picture. The special processing diffuses the light constantly, so the amount of light does not fall extremely low. For monochrome LCDs, the exposure time should be increased by 10-20%. Please note that depending on the resin, the effect may be difficult to achieve. Shipping Item(s) Diffuser panel x 1 Spacers x 4 Attention Please check your printer's lens shape and number of lenses on the LCD test screen before placing an order. Please follow the manufacturer's repair or replacement procedure for the printer as we do not support the installation of the diffuser on the LED unit or any other issue other than interference with the printer's components. Please follow the repair or replacement procedure of the manufacturer of the printer. The installation of the diffuser to the LED unit is done at your own risk. Please note that some models may need to be modified. Please note that some models may not be able to be installed due to individual differences in the printer. There is a possibility that the manufacturer's warranty may not be accepted. The manufacturer's warranty may not be available, so we do not recommend purchasing this product if you have any concerns. We also have diffusers for printers from various manufacturers that are currently under development and testing, so please contact us for more information. Mounting Dimensions When mounted Remove the protective film on both sides. The D3D logo is correctly visible, the one with the uneven surface faces up. Remove the screw holding the clear lens in place at the same point as the hole in the diffuser. Install the spacers provided. Place the diffuser on top of the spacer. Secure it with the bolts removed from the lens. Shipping Date It will be shipped in stages starting January 15, 2021. Arrival date is expected to be 2 to 4 weeks from the date of shipment.

What is a diffuser? LCD printer with RGB and monochrome LCDs. This is the most common type of LED that uses square and hexagonal optical lenses called ParaLED and MatrixLED. This part improves the unevenness of the UV light unit's light brightness. It makes pixel marks and layer bumps less noticeable, and the whole image looks more beautiful and shiny. All parts are made in Japan, so you can use it with confidence. It is installed on top of the LED unit as shown in the picture. The special processing diffuses the light constantly, so the amount of light does not fall extremely low. For monochrome LCDs, the exposure time should be increased by 10-20%. Please note that the effect may be difficult to achieve depending on the resin. Also, please note that some of them may not work well depending on the resin. (For more information, please refer to the specifications) Shipping Item Details Diffuser panel x 1 Long spacers x 4 1mm spacer x 4 Attention In case of molding defects caused by insufficient adjustment of resin parameters, such as peeling off from the platform or remaining adhered to FEP film, you may be able to use the following methods,please note that the symptoms will not improve at all. The diffuser is not compatible with the Phrozen 5.5inch LCD Make, old Shuffle and the 8.9inch LCD Make XL,old Shuffle XL with round lens. Please check your printer's lens shape and number of lenses on the LCD test screen before placing an order. Please follow the manufacturer's repair or replacement procedure for the printer as we do not support the installation of the diffuser on the LED unit or any other issue other than interference with the printer's components. Please follow the repair or replacement procedure of the manufacturer of the printer. The installation of the diffuser to the LED unit is done at your own risk. Please note that some models may need to be modified. Please note that some models may not be able to be installed due to individual differences in the printer. There is a possibility that the manufacturer's warranty may not be accepted. The manufacturer's warranty may not be available, so we do not recommend purchasing this product if you have any concerns. We also have diffusers for printers from various manufacturers that are currently under development and testing, so please contact us for more information. Mounting Dimensions When mounted Remove the protective film on both sides. The D3D logo is correctly visible, the one with the uneven surface faces up. Remove the screw holding the clear lens in place at the same point as the hole in the diffuser. Install the spacers provided. Place the diffuser on top of the spacer. Secure it with the bolts removed from the lens. Shipping Date It will be shipped in stages starting December 14, 2020. Arrival date is expected to be 2 to 4 weeks from the date of shipment.

What is a diffuser? LCD printer with RGB and monochrome LCDs. This is the most common type of LED that uses square and hexagonal optical lenses called ParaLED and MatrixLED. This part improves the unevenness of the UV light unit's light brightness. It makes pixel marks and layer bumps less noticeable, and the whole image looks more beautiful and shiny. All parts are made in Japan, so you can use it with confidence. It is installed on top of the LED unit as shown in the picture. The special processing diffuses the light constantly, so the amount of light does not fall extremely low. For monochrome LCDs, the exposure time should be increased by 10-20%. Please note that depending on the resin, the effect may be difficult to achieve. Shipping Item(s) Diffuser panel x 1 Spacers x 4 Attention In case of molding defects caused by insufficient adjustment of resin parameters, such as peeling off from the platform or remaining adhered to FEP film, you may be able to use the following methods,please note that the symptoms will not improve at all. The diffuser is not compatible with the Phrozen 5.5inch LCD Make, old Shuffle and the 8.9inch LCD Make XL,old Shuffle XL with round lens. Please check your printer's lens shape and number of lenses on the LCD test screen before placing an order. Please follow the manufacturer's repair or replacement procedure for the printer as we do not support the installation of the diffuser on the LED unit or any other issue other than interference with the printer's components. Please follow the repair or replacement procedure of the manufacturer of the printer. The installation of the diffuser to the LED unit is done at your own risk. Please note that some models may need to be modified. Please note that some models may not be able to be installed due to individual differences in the printer. There is a possibility that the manufacturer's warranty may not be accepted. The manufacturer's warranty may not be available, so we do not recommend purchasing this product if you have any concerns. We also have diffusers for printers from various manufacturers that are currently under development and testing, so please contact us for more information. Mounting Dimensions When mounted Remove the protective film on both sides. The D3D logo is correctly visible, the one with the uneven surface faces up. Remove the screw holding the clear lens in place at the same point as the hole in the diffuser. Install the spacers provided. Place the diffuser on top of the spacer. Secure it with the bolts removed from the lens. Shipping Date It will be shipped in stages starting December 14, 2020. Arrival date is expected to be 2 to 4 weeks from the date of shipment.

What is a diffuser? LCD printer with RGB and monochrome LCDs. This is the most common type of LED that uses square and hexagonal optical lenses called ParaLED and MatrixLED. This part improves the unevenness of the UV light unit's light brightness. It makes pixel marks and layer bumps less noticeable, and the whole image looks more beautiful and shiny. All parts are made in Japan, so you can use it with confidence. It is installed on top of the LED unit as shown in the picture. The special processing diffuses the light constantly, so the amount of light does not fall extremely low. For monochrome LCDs, the exposure time should be increased by 10-20%. Please note that depending on the resin, the effect may be difficult to achieve. Shipping Item(s) Diffuser panel x 1 Spacers x 8 Attention In case of molding defects caused by insufficient adjustment of resin parameters, such as peeling off from the platform or remaining adhered to FEP film, you may be able to use the following methods,please note that the symptoms will not improve at all. The diffuser is not compatible with the Phrozen 5.5inch LCD Make, old Shuffle and the 8.9inch LCD Make XL,old Shuffle XL with round lens. Please check your printer's lens shape and number of lenses on the LCD test screen before placing an order. Please follow the manufacturer's repair or replacement procedure for the printer as we do not support the installation of the diffuser on the LED unit or any other issue other than interference with the printer's components. Please follow the repair or replacement procedure of the manufacturer of the printer. The installation of the diffuser to the LED unit is done at your own risk. Please note that some models may need to be modified. Please note that some models may not be able to be installed due to individual differences in the printer. There is a possibility that the manufacturer's warranty may not be accepted. The manufacturer's warranty may not be available, so we do not recommend purchasing this product if you have any concerns. We also have diffusers for printers from various manufacturers that are currently under development and testing, so please contact us for more information. Mounting Dimensions When mounted Remove the protective film on both sides. The D3D logo is correctly visible, the one with the uneven surface faces up. Remove the screw holding the clear lens in place at the same point as the hole in the diffuser. Install the spacers provided. Place the diffuser on top of the spacer. Secure it with the bolts removed from the lens. Shipping Date It will be shipped in stages starting December 14, 2020. Arrival date is expected to be 2 to 4 weeks from the date of shipment.

What is a diffuser? LCD printer with RGB and monochrome LCDs. This is the most common type of LED that uses square and hexagonal optical lenses called ParaLED and MatrixLED. This part improves the unevenness of the UV light unit's light brightness. It makes pixel marks and layer bumps less noticeable, and the whole image looks more beautiful and shiny. All parts are made in Japan, so you can use it with confidence. It is installed on top of the LED unit as shown in the picture. The special processing diffuses the light constantly, so the amount of light does not fall extremely low. For monochrome LCDs, the exposure time should be increased by 10-20%. Please note that depending on the resin, the effect may be difficult to achieve. Shipping Item(s) Diffuser panel x 1 Wooden screws x 8 Round spacers x 8 Attention In case of molding defects caused by insufficient adjustment of resin parameters, such as peeling off from the platform or remaining adhered to FEP film, you may be able to use the following methods,please note that the symptoms will not improve at all. The diffuser is not compatible with the Phrozen 5.5inch LCD Make, old Shuffle and the 8.9inch LCD Make XL,old Shuffle XL with round lens. Please check your printer's lens shape and number of lenses on the LCD test screen before placing an order. Please follow the manufacturer's repair or replacement procedure for the printer as we do not support the installation of the diffuser on the LED unit or any other issue other than interference with the printer's components. Please follow the repair or replacement procedure of the manufacturer of the printer. The installation of the diffuser to the LED unit is done at your own risk. Please note that some models may need to be modified. Please note that some models may not be able to be installed due to individual differences in the printer. There is a possibility that the manufacturer's warranty may not be accepted. The manufacturer's warranty may not be available, so we do not recommend purchasing this product if you have any concerns. We also have diffusers for printers from various manufacturers that are currently under development and testing, so please contact us for more information. Mounting Dimensions When mounted Remove the protective film on both sides. The D3D logo is correctly visible, the one with the uneven surface faces up. Remove the screw holding the clear lens in place at the same point as the hole in the diffuser. Install the spacers provided. Place the diffuser on top of the spacer. Secure it with the bolts removed from the lens. Shipping Date It will be shipped in stages starting December 14, 2020. Arrival date is expected to be 2 to 4 weeks from the date of shipment.